|

Search keywords：

product name, product type, model number,
test method, manufacturer, technique, application

Home > Products > Category > Filter Material Tester > > Joint Services Mask Leakage Tester

Joint Services Mask Leakage Tester

BACK
Joint Services Mask Leakage Tester

info@standard-groups.com Quote

Share

Standards:

Applications:

1 MASK LEAKAGE TEST [MASK]
Tests a variety of protective masks for leakage. Masks may be tested with or without an attached hose. When a failure is detected the JSMLT provides the operator with a probe option to help isolate the location of the leak(s). In the probe mode, aerosol is directed at various areas and parts of the mask to identify which area or component of the mask is leaking. The JSMLT can also test masks equipped with a hose.
2 DRINK TUBE FLOW TEST [DRINK]
Tests for any airflow obstruction via resistance through the mask drink tube. Connecting the mask drink tube to the drink tube test adapter on the JSMLT opens the quick-disconnect valve to allow airflow. The resistance is measured as the airflow is passed through the drink tube.
3 DRINK TRAIN ASSEMBLY LEAKAGE TEST
Tests the airflow leakage through the entire mask drinking assembly. To run this test, the internal drink tube must be plugged with the Quick Release Locking System (QRLS) Pin.
4 DRINK VALVE SEAT TEST
Identifies leakage in the drink tube coupling. Once the mask drink tube is connected to the drink tube test adapter on the JSMLT, airflow leakage from the applied air pressure is measured.
5 OUTLET VALVE TEST [VALVE]
Checks the leakage from the outlet valve on the mask. Air pressure is applied against the outlet valve and the airflow is checked.
6 QUANTITATIVE FIT TEST [FIT]
Tests a mask for leakage when worn by an individual. While the subject is wearing the test mask, a shroud is placed over the head and on the individual's shoulders. For this test, aerosol is concentrated inside the shroud. The amount of aerosol that breaches the seal of the mask is calculated and displayed as quantitative fit factor, along with a [PASSED] or [FAILED] message.
7 MASK ALL TEST [M ALL]
Tests all functions of the mask and includes the mask leakage test, drink tube flow test, drink train assembly leakage test, drink valve seat test, and outlet valve test, sequentially.
8 ALL TEST [ALL]
Tests the functionality and fit of the mask and includes the mask leakage test, drink tube flow test, drink train assembly leakage test, drink valve seat test, outlet valve test, and quantitative fit test, sequentially.
 

Product Information:

The JSMLT is a portable device designed to test the serviceability and fit of protective masks. The JSMLT will provide leak and serviceability testing of designated Nuclear, Biological and Chemical Defense (NBCD)/Chemical, Biological and Radiological Defense (CBR-D) masks and components without requiring the operator to wear the mask. The JSMLT will provide quantitative fit testing while an individual is wearing his/her assigned protective mask.  The JSMLT can be set up in minutes and is completely self-contained in a rugged JSMLT Case. The JSMLT includes a universal clamping assembly, inflatable mask seal, and clamping adapters which allow it to be used to test multiple types of protective masks. The lightweight plastic headform is available in two sizes and can be quickly interchanged to accommodate a wide span of protective mask sizes. The JSMLT utilizes solid-state electronic circuitry with simple menu-driven touch pad controls and an alphanumeric display.
 
Features:
· Benefits and Features                                  · Ease of Use
· Self-Diagnostics                                            · Portability
· Data Management                                        · Menu-Driven
· Interchangeable Heads                               · Universal Clamping
· Controlled Aerosol vs. Ambient Air            · Universal Power Supply
· Custom Software                                           · Leak Isolation
· Visual/Audible Alarms                                  · Rugged Shippable Case
· Low Maintenance

Technical Parameters:
Items Parameters
Case Dimensions 32 in (L) x 22 in (W) x 20 in (H)
Weight ≈92 lbs when packed in JSMLT Case
Input Power 110V AC 60Hz 2A 220V AC 50Hz 1A
Aerosol Detection Near-forward light scattering
Aerosol Generator Output Concentrations Mask Test – approximate test concentration 60 mg/m3 ( milligrams per cubic meter)
Fit Test  – approximate test concentration 35 mg/m3 
Aerosol Oil  -  Poly Alpha Olefin-PAO-4
Communication Port Serial RS-232 (Null-modem cable required) Baud Rate –  9600
Data Bits –  8
Parity –  none
Stop Bit –  1 Flow control-  X on/X of
 

Leave Message