Search keywords：
product name, product type, model number,
test method, manufacturer, technique, application
-
Cone Calorimeter
The import of American VTEC, cone calorimeter ultra high cost performance
more
-
Digital Elmendorf Tearing Tester
Pendulum method test material tear strength, operating more simple, more accurate data
more
-
ZwickiLine Materials testing machines
Top of the world's leading universal material testing machine
more
Filter Tester G4500
BACK
Standards:
Applications:
Testing of filter media and small mini-filters in product development and during production monitoring;
Testing option based on DIN EN 1822-3(HEPA/ULPA) and ISO 29463-3;
Measurement of fraction separation efficiency for other filter media in the range from approx. 20nm to 1um;
Product Information:
G505 with U-SMPS Real-time determination of fraction separation efficiency with two UF-CPC in raw and clean gas;
MFP filter test rigs from Qinsun have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP Nano Plus 4000 is specially designed for clear determination of the separation efficiency of HEPA and ULPA filter media in accordance with DIN EN 1822-3 and ISO 29463-3. In the form of the U-SMPS , a modern and powerful nano particle measuring device with a measurement range from 5nm to 1um is used for particle size and quantity analysis. Measurement of the separation efficiency at a specific size is performed in real-time with the MFP Nano Plus 4000 and a UF-CPC condensation particle counter in both the raw and clean gas.
Real-Time measurement of the fraction separation efficiency in the MFP Nano Plus 4000 offers the following special advantage.
By measuring the particle concentration in the raw and clean gas , the measuring time for determining the fraction separation efficiency is halved.
Combining two UF-CPC versions the UF-CPC for the highest concentrations up to 2000000 Particles/cm3(single count mode) in the raw gas and the UF-CPC 50 for top counting rates at low concentrations in the clean gas ,corresponds to dilution factor of 1:200 Conventional aerosol dilution is therefore no longer necessary.
With the aid of the universal aerosol generator UGF 2000 Defined aerosol distributions matched to the MMPS range can be produced with DEHS or Salt (NaCl/KCl)
The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results.
The MFP filter test rig is a modular filter system for flat filter media and small minifilters.
Pressure loss curves, fraction separation efficiency or burden can be determined within a very period of time-both reliable and cost –effectively.
MFP filter test rigs from Qinsun have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP Nano Plus 4000 is specially designed for clear determination of the separation efficiency of HEPA and ULPA filter media in accordance with DIN EN 1822-3 and ISO 29463-3. In the form of the U-SMPS , a modern and powerful nano particle measuring device with a measurement range from 5nm to 1um is used for particle size and quantity analysis. Measurement of the separation efficiency at a specific size is performed in real-time with the MFP Nano Plus 4000 and a UF-CPC condensation particle counter in both the raw and clean gas.
Real-Time measurement of the fraction separation efficiency in the MFP Nano Plus 4000 offers the following special advantage.
By measuring the particle concentration in the raw and clean gas , the measuring time for determining the fraction separation efficiency is halved.
Combining two UF-CPC versions the UF-CPC for the highest concentrations up to 2000000 Particles/cm3(single count mode) in the raw gas and the UF-CPC 50 for top counting rates at low concentrations in the clean gas ,corresponds to dilution factor of 1:200 Conventional aerosol dilution is therefore no longer necessary.
With the aid of the universal aerosol generator UGF 2000 Defined aerosol distributions matched to the MMPS range can be produced with DEHS or Salt (NaCl/KCl)
The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results.
The MFP filter test rig is a modular filter system for flat filter media and small minifilters.
Pressure loss curves, fraction separation efficiency or burden can be determined within a very period of time-both reliable and cost –effectively.
Benefits:
Real-time determination of the fraction separation efficiency above 10 nm
The measuring time for determining the fraction separation efficiency is halved by measuring the particle concentration in the raw and clean gas.
No dilution necessary!
Combining two UF-CPC versions, the UF-CPC for the highest concentrations up to 2,000,000 particles/cm3 (single count mode) in the raw gas and the UF-CPC 50 for top counting rates at low concentrations in the clean gas, corresponds to a dilution factor of 1:200.
Internationally comparable measurement results in accordance with DIN EN 1822-3 and ISO 29463-3
Simple use of different test aerosols, such as NaCl / KCl or DEHS (others on request)
Simple measurement of the fraction separation efficiency and determination of the MPPS range
High reproducibility of the test method
Flexible filter test software FTControl
Easy to operate, even untrained personnel can be quickly trained in the use of the equipment
Cleaning can be performed independently by the customer
Short set-up times, fast throughput times
Mobile set-up, easy to move on castors
Clear verification of the function of the individual components and the system as a whole in the scope of pre-delivery acceptance testing and at delivery
Reliable functioning
Little maintenance required
Reduces your operating expenses
Technical Parameters:
| Measurement range (size) | U-SMPS 2050: 10 – 800 nm |
| Volume flow | 0.54 – 16 m³/h (pressurized operation) |
| Power supply | 115/230 V, 50/60 Hz |
| Dimensions | Approx. 600 • 1800 • 900 mm (W • H • D) |
| Inflow velocity | 1.5 – 40 cm/s (others on request) |
| Differential pressure measurement | 0 – 2500 Pa (others on request) |
| Test area of the medium | 100 cm² |
| Aerosols | Dusts (e. g. SAE dusts), salts (e. g. NaCl, KCl), liquid aerosols (e. g. DEHS) |
| Compressed air supply | 6 – 8 barg |
