What should be paid attention to when replacing the UV aging test box lamp tube?

 

1. Turn off the power supply of the test chamber: before replacing the lamp tube of the ultraviolet aging test chamber, the power supply of the test chamber must be turned off first to avoid electric shock or burn out the lamp tube.

 

2. Wait for the lamp to cool down: Before replacing the lamp, you need to wait for the lamp to cool down. The lamp tube will generate high temperature when it is working, so you need to wait for a while to avoid scalding your hands or burning out the lamp tube.

 

3. Select the correct lamp model: Before replacing the lamp, you must select the correct lamp model. Different types of lamps have different powers and lengths, and it is necessary to select a lamp that matches the test chamber.

 

4. Remove the lamp tube: When removing the lamp tube, it is necessary to operate according to the instruction manual or operation manual of the test box. It is usually necessary to open the protective cover of the lamp tube of the test chamber and remove the lamp tube fixing nut or buckle.

 

5. Install the new light tube: Before installing the new light tube, you need to adjust the light tube fixing nut or buckle to the correct position. Then insert the new light tube into the light socket and fix it with a fixing nut or snap.

 

6. Test the new light tube: After replacing the new light tube, it needs to be tested to make sure it is working properly. Before testing, it is necessary to close the protective cover of the lamp tube and turn on the power of the test chamber.

 

In short, when replacing the lamp tube of the UV aging test chamber, the above matters need to be paid attention to to ensure the smooth and safe replacement process and to ensure the normal operation of the test chamber. If you are not sure how to replace the lamp tube, it is recommended to contact the test chamber manufacturer or professional maintenance personnel for replacement.