What materials improve the safety of burning car interiors?

 

1. Insulation and barrier:
In automotive interior design, it is possible to consider adding an insulation or barrier between the interior material and the heat source. These layers, or barriers, reduce thermal energy transfer and lower the temperature of the interior material, thereby slowing the burn rate.

 

2. Flame suppressors:
Use flame suppressants to suppress the combustion process when interior materials are subjected to flames. Flame inhibitors can inhibit combustion by interfering with the combustion chain reaction and consuming combustion products.

 

3. Flame detection and alarm system:
Installing a flame detection and alarm system can detect and alarm fires early, thus helping to take quick measures to extinguish or evacuate.

 

4. Automatic fire extinguishing system:
Install an automatic fire extinguishing system inside the vehicle, such as a spray fire extinguishing system or a gas fire extinguishing system, which can quickly extinguish the fire when a fire occurs, effectively reducing the spread and damage of the fire.

 

5. Reasonable design of ventilation system:
Reasonable design of vehicle ventilation system can help remove combustion products and heat energy, and reduce the spread and spread of fire.

 

6. Comply with relevant standards and regulations:
Follow the applicable automotive interior material standards and regulations to ensure that the materials used meet safety requirements.

 

Comprehensively adopting the above-mentioned methods and technologies can improve the combustion safety of the automobile interior. When designing and selecting interior materials, it is recommended to cooperate with car manufacturers, follow relevant standards and regulations, and conduct necessary combustion tests and evaluations.