![](http://www.standard-groups.com/en/uploadfile/2014/0711/20140711053220539.jpg)
NewsInformation Center
T103 Chrysler Low Temperature Folding Tester Operation
2024/01/23
T103 Chrysler Low Temperature Folding Tester is suitable for evaluating the low-temperature performance of automotive soft decorative materials,and is used to test the low-temperature rupture resistance of soft decorative materials.
Execution standards:
LP-463KB-28-01 Method A
![](/en/uploadfile/2024/0123/20240123045018211.jpg)
![](/en/uploadfile/2024/0123/20240123045018211.jpg)
Operation:
1.Firstly,prepare the accessories and test samples;
2.Use a 1.96 N weight to verify the force of the spring on each workstation;
3.Install the samples into three workstation fixtures and tighten them in place;
4.Turn on the instrument switch;
5.First,manually jog to check the operation status of the workstation;
6.Set the number of test run cycles;
7.Start the instrument;
8.The sample is continuously subjected to folding testing;
During the testing period,the speed of operation can be controlled by adjusting the knob;
10.When the set value is reached,the operation automatically stops;
11.Remove the sample from the fixture;
12.After the experiment is completed,turn off the instrument,remove the sample,analyze and compare it to evaluate the low-temperature crack resistance performance of the stacked material(when the instrument is working,the test bench is placed in a low-temperature environment).
Previous: T102 Chrysler low-temperature bending tester operation
N e x t : T104 Chrysler Bending Tester Operation