![](http://www.standard-groups.com/en/uploadfile/2014/0711/20140711053220539.jpg)
NewsInformation Center
Interpretation of the Detection Principle of Xenon Lamp Aging Test Box
2024/03/19
Principle of xenon lamp aging test chamber: Roof, automotive components and their metal materials, building or prefabricated components, and other surface architectural coatings may encounter sudden temperature changes. For example, in hot summer, the heat inside the raw materials will accumulate, and the sudden rainstorm on the surface will quickly eliminate the heat. This strong temperature change and impact force is a challenge and training for many raw materials. According to the water self spraying effect of the xenon lamp weathering test chamber, this natural environmental standard can reproduce the harm to raw materials. The infrared sensing from the emission point of LED lights can reconstruct the entire process of heat deposition, while cold water self spraying can cause a sharp temperature cycle change.
The xenon lamp weathering test chamber has three environmental factors: sunlight exposure, rainwater, environmental humidity, condensation, and 130, which can be adjusted separately. Xenon lamps are used as lamp sources, and spectrometers similar to natural light can be seen everywhere because xenon lamps simulate natural light. The range of temperature and environmental humidity regulation is wide, and rainwater adopts a separate respiratory system. If necessary, chemicals can be added to the rainwater supply resources. Changing the water cooling temperature of the sample holder can adjust the amount of condensation on the surface of the specimen and the ambient temperature of the specimen. Therefore, the xenon lamp climate aging test chamber can be used as a component test for multi-element climate resistance.
There are many climatic and environmental factors, such as sunlight, temperature, environmental humidity, rainwater, condensation, etc; Harmful substances, smoke, etc., Identifying the characteristics of raw materials solely based on a single environmental factor experiment is not comprehensive enough. So it is necessary to conduct experiments based on the composition of several factors and try to simulate natural standards as much as possible, in order to make more suitable identification. Although outdoor exposure experiments have good authenticity and effectiveness, climate standards vary in different regions and periods. Therefore, the experimental necessity of the xenon lamp weathering test box is relatively weak. In short, as the quality of raw materials continues to improve, the exposure experiment cycle becomes longer.
Previous: Automotive coating crushed stone impact testing machine
N e x t : The precautions for using xenon lamp aging testing machine