![](http://www.standard-groups.com/en/uploadfile/2014/0711/20140711053220539.jpg)
NewsInformation Center
The precautions for using xenon lamp aging testing machine
2024/03/19
Why pay attention to some prohibited operations and important precautions during the use of xenon lamp aging testing machine?
1. Do not open the test box door during operation, unless there is an emergency situation, otherwise it may cause the test sample to rush out of the box door and cause personal injury.
2. To avoid electrostatic induction, the equipment must be grounded.
3. Regularly check the water level of the water pressure controller and circulating water tank.
4. The wet bulb test cloth should ensure a certain amount of moisture or relative humidity.
5. Check the device and read the user manual before conducting a test.
6. The environment of the test chamber must be conducted in a well ventilated and non illuminated area.
7. To avoid explosions, there must be no flammable or explosive materials in the equipment area.
The xenon lamp aging test chamber must be inspected based on the above experience during testing to effectively ensure the safety of the test chamber during testing. Of course, the test results obtained by doing so will also be accurate and error free.
Previous: Interpretation of the Detection Principle of Xenon Lamp Aging Test Box
N e x t : Introduction to Common Knowledge of Material Testing Machines