Structure and maintenance methods of UV light weather resistance test box

<p>Structure and maintenance methods of ultraviolet light weather resistance test box</p>
<p>Structure of ultraviolet light weather resistance test box:
1. Inner liner material: SUS304 stainless steel plate;
2. Box cover material: SUS304 stainless steel plate spray treated;
3. Install a total of 8 UV-A or UV-B ultraviolet lamps on both sides of the studio;
4. The heating method is an inner tank type heating, which heats up quickly and has a uniform temperature distribution;
5. The box cover is a two-way flip type, making it easy to open and close;
6. The inner tank water level automatically replenishes water to prevent damage to the heating tube due to empty burning;
7. The sample holder is made of stainless steel or aluminum alloy;
8. The bottom of the test box adopts high-quality fixed PU movable wheels;
9. The drainage system uses vortex and U-shaped sedimentation devices for drainage;
10. The surface of the sample is parallel to the plane of the UV lamp;
11. The spray type equipment is equipped with an automatic nozzle inside, and the water pressure is adjustable; 12. If the light tube is on and the door of the box is opened, the machine will automatically cut off the power supply to the light tube and enter a balanced state for cooling to prevent harm to the human body;
13. Over temperature protection inside the box. When the temperature inside the box is too high, the machine will automatically cut off the power and enter a balanced state for cooling.
14. Shell material of the box: SUS304 stainless steel plate spray treated</ p> <p></p>
<p>Maintenance method for UV light climate resistance test box:
1. During the operation of the UV light climate resistance test box equipment, please remember to maintain sufficient water source.</p>.
During the testing phase, the time required to open the box door should be minimized as much as possible.
3. There is a sensing device inside the studio, so do not suffer from strong impact. After a long period of cessation of use, if it is necessary to use it again, it is necessary to carefully check the water source, power supply, and various components before starting the equipment.
5. Due to the strong harm of ultraviolet radiation to personnel (especially eyes), operators should minimize exposure to ultraviolet radiation as much as possible (exposure time should be less than 1 minute). It is recommended that operators wear protective goggles and protective covers.
6. When the equipment is not in working condition, it should be kept dry, the running water should be discharged, and the workshop and box should be wiped dry.
7. After use, cover the plastic cover to prevent dust from entering. If there is dust, it should be removed</ p> <p></p><p></p>