NewsInformation Center
Cone Calorimeter parameters
2024/11/07
Share:
The Cone Calorimeter can be purchased in modular form so that those laboratories with particular interests such as heat release, mass loss, smoke production, etc. can initially purchase the sections they require and later add further instrumentation into the same cabinets in order to complete a full specification instrument. This is just one of the advantages of the Cone Calorimeter.
Execution standards:
SO 5660, ASTM E1354, ASTM E1474, ASTM E1740, ASTM F1550, ASTM D6113, NFPA 264, CAN ULC 135, BS 476 Part 15.
Main parameters:
Power supply: 5000W,230V,100 kW/m2
Sample size:100mm x 100mm ,thickness:50mm
Adjustable flow controls form:0-50g/s
Execution standards:
SO 5660, ASTM E1354, ASTM E1474, ASTM E1740, ASTM F1550, ASTM D6113, NFPA 264, CAN ULC 135, BS 476 Part 15.
Main parameters:
Power supply: 5000W,230V,100 kW/m2
Sample size:100mm x 100mm ,thickness:50mm
Adjustable flow controls form:0-50g/s
Advantages and characteristics:
1) Showing the status of the instrument.
2) Calibrating the instrument and storage of calibration results.
3) Collecting data generated during a test.
4) Calculating the required parameters.
5) Presenting the results in a manner approved by the Standards.
6) Averaging of multiple tests.
7) Exporting data into FDMS (Fire Data Management System) - a format used by major European and US labs for sharing data between labs with different calorimeters.
8) Exporting file for CSV (comma separated variable) files for quick transfer to spreadsheets.
Execution standards:
SO 5660, ASTM E1354, ASTM E1474, ASTM E1740, ASTM F1550, ASTM D6113, NFPA 264, CAN ULC 135, BS 476 Part 15.
Main parameters:
Power supply: 5000W,230V,100 kW/m2
Sample size:100mm x 100mm ,thickness:50mm
Adjustable flow controls form:0-50g/s
Execution standards:
SO 5660, ASTM E1354, ASTM E1474, ASTM E1740, ASTM F1550, ASTM D6113, NFPA 264, CAN ULC 135, BS 476 Part 15.
Main parameters:
Power supply: 5000W,230V,100 kW/m2
Sample size:100mm x 100mm ,thickness:50mm
Adjustable flow controls form:0-50g/s
Advantages and characteristics:
1) Showing the status of the instrument.
2) Calibrating the instrument and storage of calibration results.
3) Collecting data generated during a test.
4) Calculating the required parameters.
5) Presenting the results in a manner approved by the Standards.
6) Averaging of multiple tests.
7) Exporting data into FDMS (Fire Data Management System) - a format used by major European and US labs for sharing data between labs with different calorimeters.
8) Exporting file for CSV (comma separated variable) files for quick transfer to spreadsheets.
Previous: Working principle of pinch fold tester
N e x t : Maeser Water Penetration Tester parameters
