NewsInformation Center
Solution to the leakage of the seal of the xenon lamp weatherproof test chamber
2024/11/21
Share:
Leakage of the sealing material of the xenon lamp weatherproof test chamber will cause temperature fluctuations in the equipment and affect the accuracy of the test data. In order not to affect the progress of the test, the xenon lamp aging problem of the sealing material of the test chamber should be dealt with in time.
Standard Group (Hong Kong) Co., Ltd. is a modern technology enterprise integrating R&D, manufacturing, sales, training and service. It is committed to delivering more testing instruments to the market, providing testing instruments for textiles, leather, combustion, automotive interior and exterior trims, material environmental climate aging, etc., and can accept non-standard customization. Targeted tests can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.
Our technical engineers make the following explanation of the solution, hoping to help every customer.
Every xenon lamp weatherproof test chamber will encounter a problem after long-term use, that is, the door is not tightly sealed. What is the so-called door sealing? The long sealing ring behind the door of the xenon lamp aging test chamber is aged and deformed, or due to careless installation and door opening and closing, vibration transportation, the door seal has local dents, and deformation causes gas overflow.
Gently pry open the door with a soft seal, and use cotton to carefully press the soft cotton material at the seal to reduce the amount of cotton material at the seal, making it difficult to seal the cotton material at the seal. Because the cotton material itself is elastic, it can ensure that the seal is tightly combined with the box body.
When the sealing ring in the test chamber is in the middle or a gap is generated due to low temperature, a dryer is used as the gap. Pull out the concave part of the sealed rubber pad manually, and keep it for 20 minutes after the gap disappears.
In short, if the door seal of the xenon lamp weatherproof test chamber is not well sealed, it will directly affect the leakage of the test chamber, causing changes in the refrigeration effect, increasing power consumption, and easily causing the compressor to re-ignite. Therefore, don’t underestimate this point. If you really can’t solve this problem, it’s better to ask the manufacturer to repair it.
Previous: Water purity requirements for water-cooled xenon lamp aging test chamber
N e x t : Hydrothermal system circulation of xenon lamp weatherproof test chamber
