NewsInformation Center
UV accelerated aging test machine coating ink aging experiment
2024/12/04
Share:
The appearance of coatings and paints is greatly affected by the natural environment. Natural conditions such as sunlight, high temperature, and humidity often cause the product's appearance far from customer expectations. The UV accelerated aging test machine is the most widely used aging equipment. It can truly simulate the sunlight of the zero-boundary short-wave ultraviolet part and the realistic moisture simulation function, thereby reproducing the damage caused by sunlight, rain, and dew, and reproducing the aging phenomenon caused by years of outdoor exposure in a short time.
Standard Group (Hong Kong) Co., Ltd. was established in 2012. It focuses on the research and development, design, and production of textile testing instruments and provides textile testing instruments and services for academic research units and testing institutions. Shanghai Qianshi is currently one of the most competitive and R&D-capable textile testing instrument manufacturers in China. The R&D team is composed of experienced engineers. We are committed to serving customers wholeheartedly and striving to promote technological innovation in textile testing instruments.
Solution:
Architectural coatings: industrial coatings;
Varnish: automotive surfaces;
Rolled materials: powder coatings;
VOC coatings: marine coatings;
Wood coatings: infrared reflection;
Roof coatings: additives
Pigments
Compliance with standards:
National standards
GB/T16422.1-2006 Plastic laboratory light source exposure test method Part 3: fluorescent ultraviolet lamp
GB/T16422.3-2014 Plastic laboratory light source exposure test method Part 3: fluorescent ultraviolet lamp
GB/T14522-2008 Plastics, coatings, and rubber materials for mechanical industrial products Artificial weathering aging test method Fluorescent ultraviolet lamp
GB/T16585-1996 Vulcanized rubber artificial weathering aging (fluorescent ultraviolet lamp) test method
GB/T18244-2000 Building waterproof material aging test method
GB/T23987-2009 Paints and varnishes Artificial weathering exposure of coatings Exposure to fluorescent UV and water
General
ISO 4892-1、 ASTM G151、 ASTM G154、 JIS D0205、 SAE J2020
Coatings
ASTM D3794、 ASTM D4587、 FED-STD-141B、 GM 9125P、 JIS K 5600-7-8、 ISO 11507、 ISO 20340、 M598-1990、 NACE TM-01-84、 NISSAN M0007、 PrEN 927-6
Adhesives
ASTM C1184、 ASTM C1442、 ASTM D904、 ASTM D5215、 UNE 104-281-88
Plastics
ISO 4892-3、ANSI C57.12.28, ANSI, A14.5, ASTM D4329, ASTM D4674, ASTM D5208, ASTM D6662, DIN 53 384, ISO 4892-3, JIS K 3750, UNE 53.104
Roofing materials
ANSI/RMA IPR-1-1990, ASTM D4799, ASTM D4811, ASTM D3105, ASTM D4434
Textiles
AATCC TM 186, ACFFA GUIDELINE
Printing inks/art materials
ASTM D3424, ASTM F1945
Household appliances
IEC 60335
64a2cfcec5eca2a1cfffece39883f4e.jpg
Simulated aging mode:
Color change: fading and yellowing;
Cracking: erosion;
Adhesion loss: reduced gloss;
Powdering: blistering.
Previous: Infusion set leakage positive pressure tester operation
N e x t : Experimental parameters of MMT liquid moisture management tester
