Dry goods sharing: the operation process of xenon lamp aging test chamber

The xenon lamp aging tester is suitable for determining the weathering and light resistance of the paint film of plastics, color paints, varnishes and related product coatings, as well as the artificial acceleration test of weathering and light resistance of vulcanized rubber, textiles, electrical and electronic products and color building materials, etc. It is the artificial climate aging test equipment that simulates daylight.

 

The operation process of the xenon lamp aging test chamber is shared

 

The operation process of the xenon lamp aging tester.

1, the sample on the test frame in the xenon lamp aging tester

2, open the total power supply behind the equipment, and then open the power switch on the panel.

3, adjust the test temperature, humidity, test time and light time, etc.
 

 

(1) adjust the temperature and humidity: lightly press the SET key, through the ︿﹀ to change the test parameters.

(2) adjust the test and light time: press the time display on the plexiglass cover, through the key under the key to change the size of the middle key for the time key.

 

4, before turning on the light to open the xenon lamp to prepare, and then light, if you need the light cycle and then open the light.

5, the test is completed to turn off all the buttons.

6, open the box door to remove the test samples need to test the test sample good or bad.

 

Xenon aging test chamber can simulate the harm caused by sunlight and dew, the test chamber is to simulate the effect of sunlight with ultraviolet lamps, with condensation moisture simulated rain and dew materials to be tested are placed at a certain temperature in the alternating cycle of light and moisture to test the type of harm which includes: discoloration, fading, loss of light, chalking, cracking and blistering, brittle strength decline and oxidation.