ICI pilling and snagging tester technical characteristics

The ICI pilling and snagging tester is used to test the ease with which fabrics can produce the phenomenon of hooking under normal wearing conditions and to assess whether the product meets standard quality.

 

Main accessories.

 

ICI pilling and snagging tester is equipped with an observation box and comparison pattern cards for different fabric structures. Equipped with four test rollers (set on the fabric to be tested), nail hammer ball for tungsten carbide head, and controlled by a predetermined electronic counter.

 

Detection principle.

 

When testing, the cylinder specimen is set on the rotating cylinder, and the nail hammer suspended by a chain is placed on the surface of the specimen. When the cylinder rotates at a constant speed, the nail hammer will randomly flip and jump on the surface of the specimen and hook the specimen to produce a hook on the surface of the specimen. After a specified number of revolutions, the specimen is rated against the standard sample for the degree of hooking. Two stations and four stations are available.

Caution.

 

1, the average value of the experiment, if not a whole number, revised to zui nearest half level.

 

2、 The difference between the rating results of each piece of specimen should not exceed half a grade, otherwise the level of each specimen is reported separately.

 

3、 If the new cork liner is installed in the rolling box, it should be put into the empty tube for 200 hours before use.

 

4, the cork liner can be wiped with a small amount of methylated alcohol.

 

Technical parameters.

 

1. Sample test chamber: 4;

 

2. Each test chamber is equipped with rotating stainless steel blades;

 

3. Equipped with test chambers require good sealing;

 

4. Equipped with digital electronic counter;

 

5. Equipped with end-of-experiment alarm device;

 

6. Equipped with pressure gauge and time recorder.

 

7. Roller specification: 146×152mm

 

8. Cork liner specification: 452×146×1.5mm(L×W×H)

 

9. Specification of stirring bar: L=121mm

 

10. Speed: 1200r/min

 

11. Compressed air: 0.014~0.021Mpa

 

Operation instruction.

 

The 105mm × 105mm samples are put into the test box, under the role of the rotation of the impeller, the cork lined wall of the shelf box continuous random friction, the timer will be set to the specified time, after reaching the set time sound hold tight, prompting the end of the test. The test chamber will be injected with compressed air to enhance the flip during the test, with adjustable air pressure.

 

 

Standard International Group (HK) is an international manufacturer of ICI pilling and snagging tester, our equipment meets international standards, advanced technology, ICI pilling and snagging tester price discount, welcome to order!