Packaging container deformation pressure and burst pressure tester

 

Second, the main parameters.

 

1, drive air pressure: 0.3-10MPa

2, pressure range: 1-10MPa (adjustable) can choose other ranges

3, a set of connectors

4, the size of the box: height 900 * width 1450mm * thickness 650mm;

5, thermostat tank 15L. Temperature range 0-99 degrees, error 1 degree;

6, color 7 inch touch screen;

7, operation interface: switch between English and Chinese interface;

8, control system: PLC;

9, built-in gas storage tank high pressure 5 liters;

10, a number of high-pressure gas pipe

 

Third, the test method.

 

In the sample tank filled with water, insert the sealing head, screw (clip) tight, the tank will be filled with water and gradually increase the pressure to the deformation pressure value, hold for 10 s, observe the tank body has no permanent deformation. Continue to increase the pressure to the burst pressure value, hold for 10 s, observe whether the tank burst.

 

Fourth, the implementation of standards

GB/T 25164-2010