NewsInformation Center
A Beginner's Guide to Using fabric tensile strength tester
2023/04/24
Share:
If you are a beginner to the fabric tensile strength tester and need to use to perform fabric tensile strength test, then this guide is for you. Learning to use new equipment at first can be confusing and unsettling, but we will help you become familiar with the equipment operation procedures to ensure you perform the test successfully.
1. Preparation:
Before conducting the test, make sure you have followed the device manual to operate the device accurately. The following tools are required:
- Fabric tensile strength tester
- Standard test specimen
- Computer
- Test software
2. Equipment setup:
a. Open the test software
b. In the test software page, select "Start New Test".
c. Make sure you have connected the test equipment and computer through the network
3. For samples:
a. Test samples usually need to be prepared for testing in a laboratory environment
b. The width and length of the sample should meet the required standards
c. Ensure that the length and width of the sample follow the test standard requirements
4. To perform the test:
a. Secure the sample to the force measuring machine fixture and stretch it
b. Set the appropriate test conditions in the test software
c. Ensure that the test conditions meet the equipment requirements
d. Click "Start Test".
5. Results:
a. When the test is complete, the results will be displayed on the test software page
b. Ensure that the results meet the standard test requirements
c. Record the results in the test data table
To summarize, the process of using the fabric tensile strength tester may seem difficult, but focusing on proper operation of the equipment, understanding the test requirements, and being proficient in the equipment communication software will help the beginner testers perform the test more confidently and accurately.
Previous: Zipper Tester: Everything You Need to Know
N e x t : 2023 Polish clothing and textile exhibition FAST TEXTILE
