The Ultimate Guide to Installing a Zipper Reciprocating Pull Tester

The Zipper Reciprocating Pull Tester is a professional instrument used to test the opening and closing force of zippers and locks. Proper installation will ensure accurate and reliable test results. The following is the ultimate guide to installing a zipper reciprocating pull tester:

 

 

Before installing the zipper reciprocating tension tester, the following preparations should be made:

 

1.1 Confirm the tester's model and specification

 

Make sure the tester model and specification meet the testing standards and requirements, and confirm that all parts of the tester are intact.

 

1.2 Confirm the test sample

 

Select a zipper or zipper lock that meets the test standards and requirements as the test sample, and check that the sample is intact.

 

1.3 Confirm the installation location and bedding

 

Select the installation location and place appropriate bedding to ensure the tester is installed smoothly and firmly.

 

 

After the preparation work is completed, you can start to install the zipper reciprocating tension tester.

 

2.1 Fix the tester to the bedding

 

Fix the tester on the bedding and make sure the tester is firmly and stably installed.

 

2.2 Connect with power supply

 

Connect the tester to the power supply and make sure the tester is properly powered.

 

2.3 Connect the test sample

 

Connect the test sample to the fixture of the tester and make sure the test sample is well connected to the fixture.

 

 

After the tester is installed and connected, the tensile force test can be started. The specific operation steps are as follows:

 

3.1 Select the test method

 

Select the test method according to the test requirements, such as reciprocating cycle test, one-way tensile test, etc.

 

3.2 Start the test

 

Conduct the test according to the test requirements and confirm that the data of the test instrument is accurate and reliable.

 

 

After the test is completed, the maintenance and servicing of the test instrument should be carried out in time to ensure the service life and accuracy of the test instrument.

 

4.1 Clean the test instrument

 

Clean the test instrument and ensure that the exterior of the test instrument is dry and clean.

 

4.2 Regular calibration

 

Calibrate the test instrument regularly and ensure the accuracy of the test instrument.

 

4.3 Perform maintenance frequently

 

Carry out maintenance of the test instrument frequently, and find and fix the malfunction of the test instrument in time.

 

Installation of the zipper reciprocating tension tester needs to pay attention to the above steps to ensure the accuracy and reliability of the test results. The maintenance and care can ensure the service life and accuracy of the test instrument.