|

Search keywords：

product name, product type, model number,
test method, manufacturer, technique, application

Home > Products > Category > Other Equipment > > Battery impact tester

Battery impact tester

BACK
Battery impact tester

info@standard-groups.com Quote

Share

Standards:

　　GBIT31485-2015 "Safety requirements and test methods of power Batteries for Electric Vehicles" 　　GB/T31241-2022 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products. 　　UN383 United Nations Manual of Tests and Standards for the Transport of Dangerous Goods 　　IEC62133 "Safety requirements for batteries （groups） composed of cells and for use in portable equipment" 　　UL1642-2012 "Inner Battery Standard"

Applications:

Product Information:

Product introduction

　　The test sample cell is placed on a flat surface with a 15.8±0.2mm（5/8 in） 
diameter rod placed in a cross position over the center of the sample. A 9.1kg or
10kg weight is dropped from a certain height （610mm or 1000mm） onto the 
sample. cylinder
　　When the battery is subjected to impact test, its vertical axis should be parallel 
to the plane and perpendicular to the vertical axis of the steel column. The most 
axis of the square battery is perpendicular to the steel column, and the largest surface 
is perpendicular to the impact direction. Each battery receives only one impact test. 
The battery does not catch fire or explode.
 
Main parameter
　　Inner box size :550x550x1440mm（W x D x H）
　　Equipment dimensions :660x900x1720mm（W x D x H）
　　Material :SUS201 stainless steel plate, thickness 1.2mm and coated with Teflon
　　Outer box material: 1.5mm thick cold rolled steel plate paint treatment
　　Observation window: 250x250mm tempered glass, transparent window with 
stainless steel mesh.
　　Lighting device: The machine is equipped with a light inside to facilitate the 
observation of the state of the tested sample.
　　Smoke outlet: 100mm in diameter, located at the rear of the box.
　　Pressure relief port: The opening size is 200x200mm, located at the back of the 
box. When the sample is exploded, the pressure relief port will pop open and remove 
the pressure.
　　Door: single door open left, door equipped with safety limit switch, side equipped 
with explosion-proof chain to ensure the safety of personnel.
　　Ball weight: 9.1kg, 10kg, 0.1kg
　　Impact height :0-1000mm, commonly used test height 610 —— 25mm
　　Control mode: touch screen control
　　Displacement accuracy: 5mm soil
　　Impact mode: lift the falling ball to a certain height and release it. The falling 
ball falls freely in the vertical direction without tilting or shaking.
　　Metal rod: Diameter 15.8±0.2mm steel rod
　　Maximum battery size :200x200x200mm
　　Impact surface :45# steel paint treatment, thickness 15mm
　　Equipment weight :270kg
　　Power supply :AC220V
　　Power :600W

电池冲击试验机.png

电池冲击试验机2.jpg

电池冲击试验机3.jpg

电池冲击试验机4.jpg

电池重物冲击试验机.jpg

电池重物冲击试验机.png

电池重物冲击仪.png


Leave Message